When your dishwasher stops working, it can be confusing to try and figure out why. If you need help getting your dishwasher to work or figuring out why it’s not working, it’s always best to call a professional to look at it for you. But there are some common problems that can make a dishwasher stop working that you may be able to solve yourself. The most common reasons why dishwashers stop working or aren’t working the way they should are:
Are You Overloading The Dishwasher?
If the dishwasher is loaded with too many dishes, it can leak. If you notice water on the floor when you run the dishwasher, but it seems to be running like normal, try putting fewer dishes in each load to see if that stops the leak.
Is The Seal Is Loose Or Faulty?
This is a very common problem. Check the plastic seal around the door of the dishwasher. Look carefully for cracks, holes, or damage that could impact the integrity of the seal. Replacing a seal is a cheap and easy fix.
Are You Using Too Much Detergent?
Using too much detergent when you run the dishwasher can also cause the dishwasher to leak. Check the soap dispenser after you run a load of dishes. If there is residue in the soap compartment or if there are suds on the floor, you’re using too much detergent. Fill the detergent compartment only up to the indicated line. Or use a pre-made dishwasher detergent tab with the correct amount of detergent when you wash a load of dishes.
Is There A Loose Connection?
Check the hoses and the pipes at the back of the dishwasher to ensure all the connections are tight. Tighten any that are loose, and then run the dishwasher to see if it’s still leaking. If you can’t get the connections as tight as they should be, call a professional for help.
Do You Have Valve Problems?
If the dishes are hot, dry, and still dirty when the dishwasher finishes a cycle, the hot water and soap aren’t getting into the dishwasher, and you likely have a valve problem. Check under the sink to make sure the hot water valve is open. Another possibility is that the inlet valve is clogged. If you have ensured the hot water valve is fully open, check the inlet valve and remove any clogs. Then, try to run the dishwasher again.
Call Yogi’s Drain Service Today For Help
These are just some simple fixes to common dishwasher problems. If your problem is more complex or you are unsure why your dishwasher isn’t working, call the professionals at Yogi’s Drain Service today. One of our trained technicians will come to your home, diagnose the problem, and give you a free and fair estimate to fix it. Don’t let these issues fester – request a free quote today to eliminate your dishwasher issues!
